Hexatac HMB® Belt is one of the dopest belts in the market & made entirely here in the EU (France). We think it offers some superb features that we missed on other belts made in the US; most prominantely, small Cobra buckles on a rigid belt, which don't dig into your skin so much when prone & the adjustment solution is such a welcomed inclusion in the design as it minimalises any clutter on belt's exterior surface.
 
Developed and tested with and for operators Tactical Belt (Hexatac's Modular Belt) meets the needs of modern fighters and sports shooters.
 
Composed of state-of-the-art materialsThis tactical belt is both ultra-rigid while maintaining a featherweight (285gr only in size XL!)
 
The HMB® Tactical Belt is made up of two belts a velcro underbelt (38mm) and a external belt (50mm).
 
The outer belt has a rigid skeleton in laser-cut composite that offers high rigidity to best support your equipment.
 
MOLLE (1/2 MOLLE) loops are made from solid of the skeleton and covered with a layer of finishing fabric: the pockets that will be fitted to the HMB® tactical belt using this system will be more stable on a tactical belt with soft fabric loops.
 
The free adjustment strand of the outer belt is inside of the belt, avoiding external clutter and allowing you to take full advantage of the MOLLE slots all around the belt.
 
Made from highly resistant materials normally used for climbing equipment** (webbing, AustriAlpin Cobra® buckles and even rope), tests of breaking load under realistic conditions* have shown that the AustriAlpin loop (Certified 15KN) would break before the slightest seam in the belt was disturbed at a load of approximately 1350kg (for realistic conditions with a load pulled on the D-ring perpendicular to the belt).
 
Velcro underbelt (female) is adjustable thanks to two separate systems to ensure the best possible adaptation to each and every customer. semi-rigid to enable an IWB/AIWB holster to be worn and to ensure that the trousers stay in place.
 
With a width of 38mmit will adapt to belt loops on all types of trousers tactical or civilian.
 
Made in Europe with assembly standards mli-spec and materials imported directly from the USA.
The Cobra® buckle is an original Cobra® buckle manufactured in Austria by AustriAlpin. This brand is the undisputed benchmark for load-bearing and climbing buckles.
 
Loop assembly : To operate correctly, the buckle must be assembled as follows. Warning: if the assembly is not correct, the buckle brake will not work.
 
https://hexatac.com/wp-content/uploads/2021/03/Presentation_Ceinturon_HMB%C2%AE__Hexatac__Ceinture_Cobra_Molle-1.gif
 
The HMB® tactical belt size chart is based on your actual height and is as follows:
SMALL Size: 72.5cm - 86.5cm
MEDIUM size : 84,5cm - 98,5cm
LARGE Size : 96,5cm - 110,5cm
X-LARGE size : 108,5cm - 122,5cm